RGB LED tape strips are built with 3 bright surface mount RGB LEDs per every 2" for the best possible color density. These Lavolta LED strips are great for use as indoor strip lighting or illuminating a display case. Connecting multiple strips together is made quick and simple with solder tabs on the end of each strip. Aggressive adhesive is affixed to the back of the strip for permanent mounting.

Each Lavolta LED strip is marked with cut lines for creating a custom length strip, or up to 98 miniature 2" strip segments with three RGB LEDs per section. Each section features four solder points (voltage +, green, red, and blue) to create one of seven different colors and for easy daisy-chaining.

To facilitate ease of use, voltage dropping resistors are built-in. Simply connect a 12 VDC power supply (up to a 12 VDC, 6A power supply is recommended and sold separately) to the solder points (see wiring diagram in Manuals/Resources section on the right) and go! Additionally, you can use either the 24 or 44-key remote control LED control unit for color control or to create amazing effects. Pre-terminated with a 5" pigtail for connection to an LED control unit (sold separately). CE and RoHS compliant, IP65 rated (no ingress of dust; complete protection against contact. Water projected by a nozzle (6.3 mm) against enclosure from any direction shall cause no harm.)

Power supply sold separately, please refer to the Related Items section.

Note: Prior to attaching the LED strip to a surface, it is recommended that you clean the surface with alcohol and dry with a lint-free cloth. In order to connect the LED lighting strip correctly to a 24 or 44-key controller, align the black wire with the controller connector's arrow. The strip will only work in one direction, and you cannot harm the strip by connecting it backwards. Due to the IR operation of this product, it is possible for remote controls of other devices to inadvertently change LED settings. Connecting more than two 16 ft. strips together is not recommended. For runs longer than 32 ft., it is recommended that each strip be wired directly to the power supply.

Strip Specifications: • Minimum power requirements (per strip): 12 VDC, 2.5A • Overall dimensions: 0.44" W x 196.80" L x 0.125" H (11 x 5000 x 3.2 mm) • Segment dimensions (98 segments per strip): 2" (50.8 mm) L.

RGB LED Specifications: • LED type: SMD 5050 • Red: 624 nm wavelength, 18 lumens • Green: 518 nm wavelength, 45 lumens • Blue: 471 nm wavelength, 18 lumens.